Swift K7 is the advanced typical core alignment type fusion splicer for the medium & long range optical circuit LAN, CATV, FTTx with world-fastest in splicing & sleeve heating time. It delivers high precision performance with low loss.
l BENEFITS AND FEATURES
Internet remote access maintenance
IPAAS Technology Basis Core Alignment
¶ Swift K7 is the core alignment splicer based on the IPAAS ( Image Pattern Analysis Alignment System)
Technology.
Automatic fiber recognition
¶ SM( ITU-T G.652) , MM( ITU-T G.651) , DS( ITU-T G.653) , NZDS( ITU-T G.655) ,
SM( ITU-T G.657 A2/ B2) , SM( ITU-T G.657 B3)
Fastest splice time in industry
¶ Splicing Time : 6sec ( Quick Mode)
Fastest heat time in industry
¶ Tube heat : Typical 9sec ( IS-45 Sleeve, IS-60 mode) l Typical 13 ( IS-60 Sleeve, IS-60 mode)
User friendly GUI
Resistance to Shock, Dust and Water
¶ The splicer with high reliability has stable performance even in a harsh environment
l Shock-Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x
Powerful Lithium Polymer Battery with Large Capacity
¶ Performs 300 cycles of fusion splicing and sleeve heating with the standard battery
4.3-inch Color LCD Monitor with Touch Screen
¶ Magnification : 220X, MAX : 700X
¶ For user’ s convenience, LCD monitor has been designed with touch screen in addition to the
operation keys.
Bidirectional Operation System
¶ For user’ s ergonomic preference, the screen can be turned around for one’ s chosen viewing direction.
Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience
¶ While working in a manhole, the loader prevents the supplementary sleeve from falling and being
contaminated.
¶ Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve from
falling down.
Built-in Dual Sleeve Heater
¶ Productivity would be increased up to 30% due to a simple & user-friendly design.
¶ The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector.
Auto-Calibration
¶ Detects the surrounding environment of temperature, humidity, air pressure and measures
discharge calibration rate automatically.
Compatible with Fusion Splice-On Connector( SOC) in accordance with the Industrial Standard
l SPECIFICATIONS
Category Description
Fiber alignment
IPAAS core to core alignment( Image pattern analysis alignment system)
Applicable type of fibers
SM( ITU-T G.652) , MM( ITU-T G.651) , DS( ITU-T G.653) ,
NZDS( ITU-T G.655) , ITU-T G.657
Automatic fiber recognition
SM( ITU-T G.652) , MM( ITU-T G.651) , DS( ITU-T G.653) ,
NZDS( ITU-T G.655) , SM( ITU-T G.657 A2/ B2) , SM( ITU-T G.657 B3)
Fiber count
Single fiber
Applicable fiber dimensions
Cladding diameter: 80 ~ 150› , Coating diameter: 100 ~ 1000›
Fiber setting and cleaved length
250› : 8~ 16mm
Splicing modes
Splice mode: 300, Heat mode: 100
Typical Splice Loss
SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB
Return Loss
> 60dB
Splicing Time
Splice: Typical 6sec( Quick mode)
Splice loss estimate
Available
Sleeve heating time
Typical 9sec ( IS-45 Sleeve, IS-60 mode)
Typical 13sec ( IS-60 Sleeve, IS-60 mode)
Applicable protection sleeve
40mm, 45mm, 60mm ( fiber) , 32mm or 28mm ( Connector)
Storage of splice result
The last 10, 000 results to be stored in the internal memory.
( Image 10, 000 results)
Tension test
2N / 4.4N( Option)
Operating condition
Altitude: 0~ 5, 000m above sea level, Temperature: -10 ~ 50 , Humidity: 0~ 95% , Wind: 15m/ s, non-condensing, dust proof, water proof, shock proof
Storage condition
Temperature: -40 ~ 80 , Humidity: 0~ 95%
Dimension
142( W) X163( L) X146( H) mm( Including rubber)
Weight
2.0kg( Including battery 2.5kg)
Viewing method and display
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
Fiber view and magnification
X or Y view : 220X, MAX : 700X
Power supply
DC Lithium polymer battery( DC 14.8V, 6000mAh) , 100~ 240V AC Adapter
No. of splice cycles with battery
300cycle
Electrode life
More than 3, 500 times
Terminals
USB, RCA, External Power( DC 12V Available for car cigar jack)
l STANDARD PACKAGE
Category Model Q’ ty
Arc Fusion Splicer
K7
1
AC Adapter
F1-1
1
USB Cable
-
1
Upgrade Cable
-
1
Sleeve Loader
S312
2
Spare Electrode
EI-21
1 pair
Battery Pack
K713
1
Colling Tray
CT-03( 60mm)
1
Manual Stripper
CF-02
1
Hex Wrench
-
1
Fiber Cleaver
CI-03A
1
Moving Strap
-
1
Tool Box
-
1
Brush
-
1
Alcohol Dispenser
-
1
User Guide CD
-
1
Data Sync CD
-
1
User Manual
-
1
Silica Gel 20g
-
1
Calibration Guide Manual
-
1
HC-Key
-
1
Shoulder Belt
-
1
Carrying Case
Hard Case
1
l OPTION PACKAGE
Category Model
Battery Pack
K713
Fiber Cleaver
CS-03A ( Connector)
Cleaver Blade
BI-05
Electrode
EI-21
Fiber Holder
HS-250, HS-900, HS-2.5, HS-IN, HS-SC, HS-LC, HS-ST, LS-900
Sleeve
S-160( 60mm) , S-140( 40mm) , IS-60( 60mm) , IS-45( 45mm)
Sleeving Clamp SC-01
SOC Connector
SC, LC, FC, ST ( Refer to FTTx Solution catalogue)
RCA Cable
2.5m Black
External Power
DC 12V Available for car cigar jack
